[1]. Jinquan Cheng, Geometry and Size Effect in Metal Additive Manufacturing and Relevant Processing Parameters Optimization, TMS2019, March 10-14, 2019,  San Antonio, Texas, USA

[2]. Jinquan Cheng, Overcoming Edge and Over-hang Effect In Metal Additive Manufacturing by Process Parameters and Deposition Strategy Design, TMS2019, March 10-14, 2019, San Antonio, Texas, USA

[3].Bandar AlMangour , Dariusz Grzesiak, Jinquan Cheng, Yavuz Ertas,  Thermal behavior of the molten pool, microstructural evolution, and tribological performance during selective laser melting of TiC/316L stainless steel nanocomposites: Experimental and simulation methods, Journal of Material Processing Technology, 2018, in press, https://doi.org/10.1016/j.jmatprotec.2018.01.028

[4]. Christopher Rouleau; Zachary Gosser; Cary Smith; Zhili Zhang; Kunlun Hong; Jinquan Cheng; Yoseph Bar-Cohen; Anming Hu, Self-powered fast brazing of Ti-6Al-4V using Ni/Al Reactive Multilayer Films, Applied Science, in press, 2018.

[5].  Christopher Rouleau; Zachary Gosser; Cary Smith; Zhili Zhang; Kunlun Hong; Jinquan Cheng; Yoseph Bar-Cohen; Anming Hu, PREPARTATION OF THICK NI/AL REACTIVE MULTILAYER FILMS AND PROSPECTIVE USE FOR SELF-POWERED BRAZING OF TI-6AL-4V, Proceedings of the 46th North American Manufacturing Research Conference NAMRC46 June 18-22, 2018, College Station, Texas, USA.

[6].  Jinquan Cheng, Distortion Analysis And Reduction For Layerwise Additive Manufacturing Processing By A Laminated Layerwise Analytical Model And Tool, Materials Science and Technology 2017, Oct 8-12, 2017, Pittsburgher, PA.

[7]. Jinquan Cheng, Interfacial Bonding Quality Prediction and Improvement for Fusion Deposition Modeling by Layerwise Additive Manufacturing Analytical Block Technique, Materials Science and Technology 2017, Oct 8-12, 2017, Pittsburgher, PA.

[8]. Jinquan Cheng , Optimization of processing parameters for additive manufacturing by analytical layerwise model. Materials Science and Technology 2015, Oct.4-8 2015, Columbus, Ohio, USA.

[9]. Jinquan Cheng , Anil Chaudhary, Sudarsanam Babu, Mark Norfolk, Daniel Foster and Derek Boone, Process simulation of ultrasonic additive manufacturing and the prediction of interface bonding, Materials Science and Technology 2013, Oct.27-31, 2013, Montreal, Canada.